Chapter 223 The Rules of Big Factory

Author: Half of the west wind and half of the sand

Chapter 223 The Rules of Big Factory

Now, Old Wu dared not move the room at all, so he could only check it first, so he knew it before taking action to prevent the integrity from being destroyed in an instant.

That pile of scrap iron is worth a little money, but it does not mean that it is the optimal solution. Which company does not require cash flow? It is all under pressure, so it is not as smooth as cash flow.

"He always feels a little pitiful!"

"What a pity! Suppose if our cash flow is cut off now and we can't get money from him, Brother Donglai can't pay us a salary, who do you think is pitiful?"

He patted the carriage, the truck slowly started, and reached out to Yu Wei's company door slowly closed. Ding Aixing glanced at He Xiaolong.

"It seems yes, it makes sense for you to say that. Those who don't pay deserve it!"

The effect of swapping positions is immediate. He Xiaolong doesn't sympathize with Yu Wei at all, and even hates the other party a little, thinking that you deserve it.

When installing the hot-dip galvanizing production line, Ji Donglai handed over the power line to Ji Ping, and Ji Donglai went to the power plant to settle the final payment for the repair of the reactor.

According to the project requirements, it must be safely operated for more than two months before the other party can be considered acceptance. This project has been in operation for more than three months, and Ji Donglai can finally receive the project payment.

"Mr. Ji, we still have some projects here. Let Xiaotian bring them to see later. If you can do it, you will take it. After all, we still recognize your project quality! This project was done well last time, I wish you a happy cooperation in the future!"

After signing the project payment form, the boss of the other party signed the letter and said this to Ji Dong. Ji Donglai hurriedly thanked him, turned around and looked for Mr. Tian after he went to the finance department.

"This project is not difficult. The main problem is that you have to do hot-dip galvanizing after welding. Our last supplier made this with some flaws. The welds cracked later. Look at this photo!"

There is nothing extra to say on Mr. Tian. Ji Donglai is doing this project well and he has great strength in the boss. The key is that Ji Donglai is more sensible and invites him out to have tea and chat when he is fine.

Ji Donglai took the project failure ticket and looked at it for a few times, and couldn't help but frown.

It can be seen that the other party's weld should be dioxide welding, and the bonding surface is also quite good, but I don't know why it cracked, and it is likely that the welding rod will not work.

Ji Donglai followed Mr. Tian to the scene for a while, but Ji Donglai was very surprised.

"This pillar has also cracked, hiss..."

Ji Donglai randomly inspected the welds of a column, but immediately found that the welds were cracked, and Mr. Tian’s head was two in an instant.

There are problems with the other party's construction columns one after another, which is no longer a trivial matter. According to the factory's judgment standards, it is likely that the material selection or design is unreasonable.

The next step is to hold a quality analysis meeting. If you really get it up, you have to follow melons and fall down. Mr. Tian kept greetings to the ancestors of the previous construction party in his heart.

"This matter is troublesome. If it is a pillar, we can replace it! Now it is gradually cracking. I found two. You found them again today. What's wrong with those things!"

"We will definitely not allow this situation to happen here. Mr. Ji, you will have to wait first if you receive the project payment. This must be done, otherwise you will really let the leader find out, and someone will lose his hat!"

As he said that, Mr. Tian started to make phone calls, from quality to production, and then on-site construction supervision, leaders from various safety departments called a lot.

These leaders then called people here to search for various records.

It turns out that big factories are big factories. They found all the quality supervision, the construction party’s material reports, construction qualifications, and various materials for welding rods.

Then there was an accident analysis meeting. The person in charge of the entire power plant began to analyze and then reported it step by step.

Ji Donglai just looked at the beginning, and the rest of the time was to go back and wait for the settlement of the project funds. Zhao Shuying followed him. The other party was the busiest these days, and he took inventory of the various assets he had recovered and then recorded them.

In order to carry out the work reasonably, Zhao Shuying recruited several warehouse managers after Ji Donglai's approval, all of whom were local women, and he could only record the words and understand the records. When he was fine, he would do an inspection with Sun Li.

"Donglai, his welding is probably wrong with the welding rod, except for hydrogen! This slow cracking and it is outdoors, which is inevitable! And I guess his galvanization is not hot-dip galvanization, but it should be early electroplating, fast! But brittleness cannot be avoided. If there is another problem during the steel forming process, the problem will be even greater!"

"Now we adopt a new process, especially hot-dip galvanizing. Cook the weld in the zinc pot for 470 degrees for a period of time. Not only can we remove hydrogen, but we can also slowly release the stress of the weld, which can basically avoid this situation!"

"In addition, part of the hydrogen can be removed during pickling. This company should be pursuing speed when working, and did not consider the subsequent hydrogen removal steps. This is not advisable! Fortunately, these workpieces are all supported, and if it is a beam, something big will happen!"

Everyone in the technical department of Ji Donglai Company is discussing the possible reasons for the breakage of the column weld of the power plant. In the power plant, four transportation trucks are slowly passing through a certain area.

It happened to be a speed limiting belt. When the truck passed the speed limiting belt, it made a clang, and three galvanized cross beams on its head dragged six pipelines of five hundred thicknesses.

As a Roots pump begins to scream, fluid in the pipeline passes at high speed, and the pipeline begins to oscillate slightly. The weld cracks on the beam begin to crack at a speed visible to the naked eye.

"Bang!"

Another car passed the speed bump. The things pulled on the car made a huge roar due to the bumps. A cross beam on it finally couldn't help it, and the entire welded port was broken.

"Bang!"

The front wheel of the third car had just passed the speed bump, and the cab appeared under the beam, and the entire beam hit the cab heavily.

"Boom!"

"Crash!"

"Ah...my mom!"

"Bang!"

As the beam hit the cab heavily, the windshield glass was broken, and the vehicle's airbag exploded. The driver was pushed and leaned back, his neck was stuck on the sharp iron plate, and half of his head fell off like this.

Ji Donglai's group of people discussed for more than two hours, and waited until the rapid phone ringing rang. Ji Donglai looked at Mr. Tian's phone and quickly answered it.

"Mr. Tian..."

"Mr. Ji, don't interrupt me! I want you a good word. Is there any problem with the project you are doing? If there is any report to us immediately! A person died in the factory just now, and a major quality and safety inspection will be carried out immediately. The first thing you are required is your self-inspection project. If you have any problems and fail to report them, it is not a trivial matter of your self-inspection!"

(End of this chapter)
Chapter completed!