Frost: The total length is 122 cm, the sword hilt is 30 cm, and the sword blade is 92 cm.

This is the basic parameters of the Frost Sad Sword around World of Warcraft created by Ge Xiaohua. It is not clear whether it can be emitted. After planning the parameters of the sword, he outlined the full picture of the sword design. Ge Xiaohua threw the design drawings into the stove, and the burning flames instantly burned the design drawings to ashes. For a moment, the Frost Sad Sword in the picture seemed to be dancing in the flames.

Forging officially began. Ge Xiaohua was highly focused. With previous experience and communication with his father, Master Yamamoto and others, as a layman who became a monk, gradually gained a new understanding of forging. The more he knew, the more he felt his own lack of strength and studied with admiration.

This type of European sword with unique shape generally requires molds. Although it takes a lot of time to make molds, it is relatively efficient to forge and mold. However, Ge Xiaohua did not cast the mold to make the sword body, and he still used folding forging, because the ground muscles will appear when folded to a certain extent. According to the rhythm, frequency, and strength of the beat, the appearance of the pattern is different.

Ge Xiaohua did not intend to engrave the "magic rune" but it does not mean that there is no pattern. The ground muscles on the sword body will become natural magic rune!

Folding, forging, and heating cycles over and over again, Ge Xiaohua has become accustomed to this forging method because he knows that this is the most advanced way to forge swords at present. The reason for doing this can effectively remove impurities in the steel block to achieve the level of combining hardness and softness. This is also the reason why iron tools have been able to continue to this day since their publication.

This day was spent in the banging, but in order to improve efficiency, he used a combination of air hammer and violent hammer, which was a coordinated forging of machinery and human power.

"When you go to the United States forging, there may be time restrictions. There are basically full-process mechanical assistance, so it is very important to be familiar with mechanical operations." Ge Xiaohua knows that pure handmade forging is difficult to do now, and only small rural blacksmith shops may do it. These are due to labor costs. Those high-tech tools cannot be purchased. It is actually a helpless move to insist on using pure handmade. Nowadays, large blacksmith shops are basically mechanized, and pure handmade is hard to see.

Ge Xiaohua can't be purely mechanical or manual. After he has been exposed to the two forging methods of pure mechanical and pure manual, he concluded that the best method is mechanical and manual fusion, so that there can be benefits in efficiency and quality. However, Ge Xiaohua has not yet achieved real integration and is still exploring.

With the help of the air hammer, folding and forging will not have to be so tired. He only needs to master the landing point, the angle of the hammer, and control the air hammer. He can hand over the heavy work to the machine and free up his energy to complete it.

Ge Xiaohua was still mastering this balance point, but the forging was still smooth this day, and the outline of the sword body was gradually forged out.

The next day, Ge Xiaohua spent all morning and looked at the ground muscles of the sword body. Because of the air hammer, the number of folded and forged layers reached about 12,000 layers, which was more folded than manual forged.

"The effect of the ground muscles is pretty good, much better than the forced etched runes." Ge Xiaohua's sword body was forged and formed, and another important step was to quench it!

Ge Xiaohua applied the secret recipe for Ge's ancestors to temper the sword blade. Thinking of Ge Jianguo's previous practice, he put the sword embryo on the shelf, washed his hands, and solemnly wrote a line of words on the table with a brush.

After writing, he threw it into the stove. Ge Xiaohua inserted the sword embryo in the situation and observed the flames, the sword embryo and the surrounding temperature. He seemed to be fearing the flames, approaching the stove. Although he was sweating profusely, he still did not move at all.

"I'll do it for dad!" The paper was thrown into the stove, and for a moment the font was displayed. It turned out that Ge Xiaohua wrote this sentence on the paper. If Ge Jianguo knew about it, he would probably be furious!

Ge Xiaohua observed that the temperature reached 800-1000 degrees of optimal quenching, and the flame gradually turned blue, and reheating would exceed the quenching opportunity, so he decisively pulled out the sword embryo.

"Let's!" Ge Xiaohua put the sword embryo in the sink, and a burst of white smoke floated by with a pleasant sound. The inner high temperature of the sword embryo then turned to low temperature, producing a magical chemical reaction.

"It's done!" Ge Xiaohua successfully quenched and observed that the sword embryo had changed. Although it still looked dark, it would emit light as long as it was polished and polished.

Next is the creation of the sword hilt and the neck of the sword. The decoration part is the top priority and it will take more time, but today Ge Xiaohua used all the time to polish it.

In addition to the initial polishing of the sword body, the next step is fine grinding. Although it is assisted by machinery, the efficiency is not high. This is different from the previous forging. The forging used to take less time, mainly because Ge Xiaohua's blacksmith technology was not up to standard, and it relies entirely on the light attribute added by the later system to make a living. Now Ge Xiaohua's technology has improved a lot. Knowing that even if it does not bring light, the forged iron tools are also fine. The reason why handicrafts are expensive is because they consume a lot of manpower, so the cost will be high, and the time cost is higher than any cost.

After polishing for about two days, Ge Xiaohua began to make other steps. If there is no mechanical assistance, such as Yuji Yamamoto's brother Yuya Yamamoto used whetstones of different thicknesses to polish them, it will not take a few days, but calculated in the month.

Ge Xiaohua's patience on this point is indeed impossible to compare with them, and it can kill many people. The same action is polished for several months and repeated over and over again. What is tested is not only patience and perseverance, but a kind of persistent craftsmanship and willpower.

This is worth learning, but it is not the direction of Ge Xiaohua's struggle. Now he plans to combine machinery and artificially into one, and how to neutralize the two is what Ge Xiaohua has to work hard these days.

It took about a week to create the classic weapon shape around World of Warcraft.

The attached attributes are worth the time to spend, and it is well-made, so this sword around the game must be valuable.

Frost sadness: Green light, sharp +5, solid +7, exquisite +8.

Ge Xiaohua also made a metal iron plate for hanging walls and hung it on the wall. The surroundings of this game are obviously used for collection and decoration.

"Put it away first, wait until the second episode of "Extraordinary Blacksmith" is broadcast to see how popular it is, and then consider the price of this sword." Now Ge Xiaohua has handed the Shuangzhi sadness to Li Xiaogan's friend, so the price cannot be too high. It is already generous to give him a hundred thousand. After all, Ge Xiaohua is just a little famous in the local TV station and is unknown throughout the country.

The price of sword forging masters with Longyuan brand forging is higher than that of Ge Xiaohua now. Although the quality of the products may not be as good as Ge Xiaohua, they are famous, so I have to accept this.
Chapter completed!